Industrial RO4.7 (34)
RIVO R 150-SA
150 LPH semi-automatic RO — the smallest plant in the range
Capacity150 LPH
StorageExternal tank, sized to duty
SedimentCarbonRO
Your Process Is Different.Your Water Treatment Should Be Too.
A dyehouse, a dairy and a dialysis unit can all draw from the same borewell and still need three different plants. The industry sets the requirement; the water sets the process.
10Industries served
10Solution types
Up to 75%RO recovery*
01Industries
Ten Industries.Ten Different Water Questions.
The industry tells us what the water has to achieve. The analysis tells us how to get there. Neither one is enough on its own.
01
Manufacturing
Process water to a specification the line can hold, plus effluent treated against the site's discharge or reuse target.
02
Food & Beverage
Treated water for product contact and for utilities, with pre-treatment sized so the plant holds output through a full shift.
03
Textile
Softened process water upstream, and effluent with an RO recovery stage where the site wants water back rather than only compliance.
04
Engineering Industries
Demineralised water for plating, rinsing and boiler feed, polished to whatever conductivity the process actually requires.
05
Hotels
One plant room serving guest, kitchen and utility demand — sized against peak draw, not average consumption.
06
Schools & Colleges
Drinking-water points across a campus, fed from central treatment so the maintenance stays in one place.
07
Commercial Buildings
Treated supply for occupants and an STP designed so its output is reusable for flushing and landscaping.
08
Hospitals
Facility-wide treatment plus the specialised systems — dialysis, laboratory — that sit inside it with their own requirements.
09
Laboratories
Reagent-grade water at the bench, sized for intermittent draw-off rather than continuous demand.
10
Institutions
Large-occupancy campuses where the drinking-water requirement and the wastewater requirement are one design problem.
02Capability
Solutions We Engineer
From the pre-treatment train through to water recovery and reuse — designed, built, installed and supported by the same team.
Talk to an Industrial Water Engineer01WTP
02UF
03Industrial RO
04High-Recovery RO
05Softening
06Demineralization
07Process Water Treatment
08STP
09ETP
10Water Recovery & Reuse
03Systems
Commercial & Industrial Systems
Capacities from a 100 LPH skid to a full plant room. Everything above entry level is engineered to order and quoted against your feed water.
Best Seller
Industrial RO4.8 (93)
RIVO R 250
250 LPH RO — semi-automatic or fully automatic
Capacity250 LPH
StorageExternal tank, sized to duty
SedimentCarbonRO
Industrial RO4.8 (85)
RIVO R 500
500 LPH RO — semi-automatic or fully automatic
Capacity500 LPH
StorageExternal tank, sized to duty
SedimentCarbonROSoftening
Best Seller
Industrial RO4.9 (124)
RIVO R 1000
1000 LPH RO — the workhorse size, SA or FA
Capacity1000 LPH
StorageExternal tank, sized to duty
SedimentCarbonROSoftening
NewEngineered
Industrial RO4.9 (62)
RIVO R 2000
2000 LPH RO — the top of the RIVO range
Capacity2000 LPH
StorageStorage designed with the plant
SedimentCarbonROSoftening
Water Treatment4.6 (22)
CLEANFLO SF – PSF 100
Pressure sand filtration, vessel size 100
CapacityPer project
StorageExternal tank, sized to duty
Sand FiltrationSediment
Water Treatment4.7 (27)
CLEANFLO SF – PSF 150
Pressure sand filtration, vessel size 150
CapacityPer project
StorageExternal tank, sized to duty
Sand FiltrationSediment
Engineered
Water Treatment4.8 (19)
CLEANFLO SF – PSF 350
Pressure sand filtration, vessel size 350
CapacityPer project
StorageExternal tank, sized to duty
Sand FiltrationSediment
Water Treatment4.7 (44)
CLEANFLO SN 100
Ion-exchange softening, vessel size 100
CapacityPer project
StorageExternal tank, sized to duty
Softening
Water Treatment4.7 (36)
CLEANFLO SN 150
Ion-exchange softening, vessel size 150
CapacityPer project
StorageExternal tank, sized to duty
Softening
Engineered
Water Treatment4.8 (25)
CLEANFLO SN 350
Ion-exchange softening, vessel size 350
CapacityPer project
StorageExternal tank, sized to duty
Softening
Engineered
Wastewater4.8 (31)
ECO TREAT
STP and ETP, 5 KLD to 500 KLD
Capacity5 KLD – 500 KLD
StorageTreated-water tank, sized to reuse
BiologicalSedimentSand Filtration
08High-Recovery RO
More Recovery.Less Reject.
0%Up to — RO recovery*
Bright Water Tech designs high-recovery RO plants capable of achieving up to 75% recovery, where feed-water conditions permit. The gain comes from the staging, the pre-treatment and the dosing regime working together — not from running a standard plant harder.
Higher recovery = More useful water + Less reject
*Recovery depends on source-water characteristics and system design.
Recovery at the design ceilingIllustrative
Feed water drawn100
Useful water recoveredup to 75
Reject to handlefrom 25
PermeateRejectFeed
04Project Process
Six Steps,Every Project.
From the first water sample to the service visit two years later — the same sequence, whether the job is a single purifier or a plant room.
01
Analyse
Understand the source water and application.
02
Design
Develop the treatment process and engineering solution.
03
Customize
Select equipment and configuration according to project conditions.
04
Manufacture
Build the system with quality-focused components and fabrication.
05
Install & Commission
Complete installation, testing and commissioning.
06
Support
Provide service, maintenance and long-term technical support.
Ready to start from your water?
Whether you are looking for a home purifier or planning an industrial plant room, our engineering team is in Salem.
Or call us directly — +91 99438 46677
Domestic | Commercial | Industrial | Healthcare