RIVO R 150-SA
150 LPH semi-automatic RO — the smallest plant in the range
STP and ETP, 5 KLD to 500 KLD

STP and ETP, 5 KLD to 500 KLD
This system is sized, configured and costed against your source-water analysis, required output quality and capacity. Publishing a number here would mean quoting a system we have not designed yet — send us your requirement and we will come back with both.
Sewage and effluent treatment, anywhere between 5 and 500 KLD. On the sewage side the process is designed backwards from what you intend to do with the treated output — if it is going to flush toilets and water landscape, that target sets the process, not the discharge limit. On the effluent side it is specified against what is actually in your effluent, which is a different question for every process: physico-chemical and biological stages selected from the analysis and the consent you have to meet. Either way the plant is laid out to the space the site actually has.
Multiple barriers in sequence, each removing what the next one cannot.
Components selected for service life, not for a spec sheet.
Configured against your feed analysis, not a regional average.
Front-access cartridges and a documented service interval.
Installation, commissioning and AMC by the team that designed it.
Values marked “demo value” are placeholders for this showcase build. Recovery is always stated as source-dependent, because it is.
Send us the source, the daily requirement and an analysis report if you have one. If a different system suits you better — or if you do not need one at all — that is what we will tell you.
150 LPH semi-automatic RO — the smallest plant in the range
250 LPH RO — semi-automatic or fully automatic
500 LPH RO — semi-automatic or fully automatic
1000 LPH RO — the workhorse size, SA or FA
Whether you are looking for a home purifier or planning an industrial plant room, our engineering team is in Salem.
Or call us directly — +91 99438 46677